KN510
Tie-Grabber

KN510 Tie-Grabber

features etc.

  • The KN510 Tie-Grabber picks up and ties bales that are arranged by the AE10 bale accumulator. Two long, five wide, on edge.
  • A lower weight requirement for this tie-grabber allows for the use of a smaller loader, and the bundle can be picked up from any of its sides
  • If bales are 36″ long, you are able to cross-stack them with this model or the 510 Grabber
  • Requires a loader with at least 1,800lb lift capacity, and one set of remotes with an optional splitter or two sets of remotes without a splitter
Request a Quote Find a Dealer

Knotter

This highly reliable Rasspe Knotter allows for a consistent tying method.

Squeeze Arm

Once the machine is aligned with the bale bundle, the Squeeze Arm applies pressure and squeezes the bales tightly together to form a strong and compact bundle. This arm is important for creating a bundle that is easy to stack, move, and load.

Loader Mount

This customizable option allows you the flexibility to move between multiple loader hookups.

Twine Arm

When hydraulically engaged, the twine arm wraps twine around the bundle of bales to hold the bundle together.

Multiple Hose Options

This machine allows you to choose two hydraulic hoses with a wire control in the cab, or a four hydraulic hose option. This customizable feature allows you to choose the best option for your operation.

Detailed Specs

Bale Configuration

5 Bales Wide and 2 Bales Long

Bundle Dimensions

72” Wide by 64” to 72” Long

Required Loader Capacity

1,800 lbs.

Working Height

2 ft. 6 in.

Working Length

6 ft. 0 in.

Working Width

6 ft. 0 in.

Approximate Weight

1,380 lbs.

}