F4 Bale
Accumulator System
The entry-level Norden Bale Accumulator system, the F4 system enables an efficient entry to small square bale handling. Often chosen by small acreage operators that need to be able to handle bales by themselves or with minimal help. We recommend this system to farmers that produce between 3,000 to 10,000 bales annually.
Square Bale Accumulator For 4 Bales Flat
Straight Chute
The straight chute allowed each bale to stay flat on its strings, while the baler provides the force needed to push the bales to the top of the chute.
Stainless Steel Deck
The stainless steel deck provides a better surface for the bales to slide in higher dirt and moisture conditions.
Gravity-Driven Gates and Final Bale Lever
The last bale in the grab opens the back gate. As the accumulator unloads itself, springs automatically return all the gates back to their starting position, and the rear gate snaps back shut, ready for the next bale.
Automatic Lift Gate
The last bale in the grab opens the back gate. As the accumulator unloads itself, springs and counterweights automatically return all the gates back to their starting position, ready for the next bale.
CORNERING GUIDE BELT
Sharp turns are no problem as the guide belt keeps bales properly aligned and moving up the chute.
Bale Configuration
4 Bales Wide and 1 Bale Long
Group Dimensions
72″ Wide by 64″ to 80″ Long
Required Loader Capacity
1,232 lbs.
Working Height
7 ft. 5 in.
Working Length
12 ft. 11 in.
Working Width
7 ft. 4 in.
Bale Handlers
For the F4 Accumulator System
EGF8 Grabber
steel bale hooks
Once the group is tight, a single hydraulic cylinder rotates all the hooks simultaneously into the top of the bales to pick up the group. These durable hooks allow for 2 hooks per bale to ensure the bundle is secure while transporting bundles.
Detailed Specs
Bale Configuration
4 Bales Wide and 1 Bale Long
Group Dimensions
72″ Wide by 64″ to 80″ Long
Required Loader Capacity
1,232 lbs.
Working Height
7 ft. 5 in.
Working Length
12 ft. 11 in.
Working Width
7 ft. 4 in.
EGF8 Grabber
steel bale hooks
Once the group is tight, a single hydraulic cylinder rotates all the hooks simultaneously into the top of the bales to pick up the group. These durable hooks allow for 2 hooks per bale to ensure the bundle is secure while transporting bundles.
Detailed Specs
Bale Configuration
4 Bales Wide and 1 Bale Long
Group Dimensions
72″ Wide by 64″ to 80″ Long
Required Loader Capacity
1,232 lbs.
Working Height
7 ft. 5 in.
Working Length
12 ft. 11 in.
Working Width
7 ft. 4 in.