Bale Accumulator

Square Bale Accumulator For 10 Bales on Edge

  • Bales arranged on edge, 5 bales wide/2 bales long
  • Handles bales from 32” to 40” in length
  • The 10-bale group is ideal for smaller operations, compatible with a small loader because its lighter weight is under the maximum weight requirement of a grabber
  • If the bales in this arrangement are 36” long, enabling cross-stacking of bales with the KN510 Tie-Grabber or 510 Grabber models
  • The bale group size is 75″ wide and 64″-80″ long.

Twisted Chute

The twisted chute turns each bale onto its side, while the baler provides the force needed to push the bales to the top of the chute.

Stainless Steel Deck

The stainless steel deck provides a better surface for the bales to slide in higher dirt and moisture conditions.

Gravity-Driven Gates and Final Bale Trip

As gravity moves the bales downward, the last bale in each row swings a gate to open the next row. The last bale in the grab opens the back gate.

Automatic Rear Gate

The last bale in the grab opens the back gate. As the accumulator unloads itself, springs automatically return all the gates back to their starting position, and the rear gate snaps back shut, ready for the next bale.

Cornering Guide Belt

Sharp turns are no problem as the guide belt keeps bales properly aligned and moving up the chute.

Bale Configuration

5 Bales Wide and 2 Bales Long

Bundle Dimensions

72” Wide by 64” to 80” Long

Approximate Weight

2,130 lbs.

Working Height

9 ft. 2 in.

Working Length

17 ft. 4 in.

Working Width

7 ft. 10 in.