Af10
Bale Accumulator

Square Bale Accumulator System For 10 Bales FLat

  • Most popular bale accumulator sold by Norden Mfg.
  • 10 bales arranged flat with their string side down, 4 bales wide/2 bales long and two bales turned sideways to the rest of the group for a tie row.
  • Handles bales from 32” to 38” in length
  • 10-bale group is well-suited for small farms, compatible with a smaller loader because its lighter weight is under the maximum weight requirement of a grabber
  • Bundles fill a 7.5’ wagon from one side to the other, and the tie row allows for cross-stacking with the KN510F Tie-Grabber or the 510F Grabber, making loads more stable on wagons and in trucks
  • The bale group dimensions are 72”- 76” wide by 82”- 94” long
Request a Quote Find a Dealer

Straight Chute

The straight chute allowed each bale to stay flat on its strings, while the baler provides the force needed to push the bales to the top of the chute.

Stainless Steel Deck

The stainless steel deck provides a better surface for the bales to slide in higher dirt and moisture conditions.

Gravity Driven Gates and Final Bale Lever

As gravity moves the bales downward, the last bale in each row swings a gate to open the next row. The last bale in the grab opens the back gate.

Automatic Lift Gate

The last bale in the grab opens the back gate. As the accumulator unloads itself, springs automatically return all the gates back to their starting position, and the rear gate snaps back shut, ready for the next bale.

CORNERING GUIDE BELT

Sharp turns are no problem as the guide belt keeps bales properly aligned and moving up the chute.

Bale Configuration

4 Bales Wide and 2 Bales Long, plus a tie row with 2 bales turned sideways

Group Dimensions

72” to 76” Wide by 88” to 94” Long

Required Loader Capacity

2,240 lbs.

Working Height

10 ft. 1 in.

Working Length

18 ft. 10 in.

Working Width

7 ft. 10 in.