F10 Bale
Accumulator System
The Bale Accumulator System for the F10 bale group is the most popular for farmers wanting to use existing wagons and trailers. The width of the group fits nicely on an eight-foot wagon and with the cross-tie bales the load is relatively secure. It is also a nice fit for many loaders and skid steers already operating on the farm. We recommend this system for farms producing 10,000 to 20,000 bales annually.
Square Bale Accumulator System For 10 Bales FLat
Straight Chute
The straight chute allowed each bale to stay flat on its strings, while the baler provides the force needed to push the bales to the top of the chute.
Stainless Steel Deck
The stainless steel deck provides a better surface for the bales to slide in higher dirt and moisture conditions.
Gravity Driven Gates and Final Bale Lever
As gravity moves the bales downward, the last bale in each row swings a gate to open the next row. The last bale in the grab opens the back gate.
Automatic Lift Gate
The last bale in the grab opens the back gate. As the accumulator unloads itself, springs automatically return all the gates back to their starting position, and the rear gate snaps back shut, ready for the next bale.
CORNERING GUIDE BELT
Sharp turns are no problem as the guide belt keeps bales properly aligned and moving up the chute.
Bale Configuration
4 Bales Wide and 2 Bales Long + Tie Row of 2 (Sideways)
Group Dimensions
72” to 76” Wide by 88” to 94” Long
Required Loader Capacity
2,240 lbs.
Working Height
10 ft. 1 in.
Working Length
18 ft. 10 in.
Working Width
7 ft. 10 in.
Bale Handlers
For the F10 Accumulator System
510F Grabber
Steel Tube frame
This quality steel frame ensures high strength and durability.
Cast steel bale hooks
Once the group is tight, a single hydraulic cylinder rotates all the hooks simultaneously into the top of the bales to pick up the group. These durable hooks allow for 2 hooks per bale to ensure the bundle is secure while transporting bundles.
Adjustable Crowd Bar
The Standard Grabber features an adjustable crowd bar that is mounted on the side of the grabber. When approaching a group of bales, the adjustable crowd bar works in combination with the back frame to crowd the bale group together.
Detailed Specs
Bale Configuration
4 Bales Wide and 2 Bales Long + Tie Row of 2 (Sideways)
Bundle Dimensions
72” to 76” Wide by 88” to 94” Long
Required Loader Capacity
2,240 lbs.
Working Height
10 ft. 1 in.
Working Length
18 ft. 10 in.
Working Width
7 ft. 10 in.
KN510F Tie-Grabber
Knotter
This highly reliable Rasspe Knotter allows for a consistent tying method.
Squeeze Arm
Once the machine is aligned with the bale bundle, the Squeeze Arm applies pressure and squeezes the bales tightly together to form a strong and compact bundle. This arm is important for creating a bundle that is easy to stack, move, and load.
Loader Mount
This customizable option allows you the flexibility to move between multiple loader hookups.
Twine Arm
When hydraulically engaged, the twine arm wraps twine around the bundle of bales to hold the bundle together.
Multiple Hose Options
This machine allows you to choose two hydraulic hoses with a wire control in the cab, or a four hydraulic hose option. This customizable feature allows you to choose the best option for your operation.
Detailed Specs
Bale Configuration
4 Bales Wide and 2 Bales Long + Tie Row of 2 (Sideways)
Bundle Dimensions
72” to 76” Wide by 88” to 94” Long
Required Loader Capacity
2,240 lbs.
Working Height
10 ft. 1 in.
Working Length
18 ft. 10 in.
Working Width
7 ft. 10 in.
Sq90 Bale Squeeze
Strong Where Needed
Designed and built with precision, this squeeze maximizes lifting capacity while providing the necessary strength. Developed in collaboration with the experts at Clerf, upgrade your operation and experience effortless bale handling today.
Move many Bales in a short order
Moving multiple tied layers of bales in a single move will save you the maximum amount of time. Capable of handling up to 4,000 lbs., this squeeze allows you to move up to eighty, 50 lb. bales at once, streamlining your operations and increasing productivity. The only question is if your loader can take it.
Your Loader, YOur Bale Squeeze
Whether it is your skid steer, telehandler, or forklift we likely already have the ability to attach to it. We have the technology to make it happen.
Detailed Specs
Shipping Dimensions
Working Dimensions
Approximate Weight
Group Size
72” to 76” Wide by 88” to 94” Long
Maximum Lifting Capacity
2,240 lbs.
Bale Packs
4 Bales Wide and 2 Bales Long + Tie Row of 2 (Sideways)
510F Grabber
Steel Tube frame
This quality steel frame ensures high strength and durability.
Cast steel bale hooks
Once the group is tight, a single hydraulic cylinder rotates all the hooks simultaneously into the top of the bales to pick up the group. These durable hooks allow for 2 hooks per bale to ensure the bundle is secure while transporting bundles.
Adjustable Crowd Bar
The Standard Grabber features an adjustable crowd bar that is mounted on the side of the grabber. When approaching a group of bales, the adjustable crowd bar works in combination with the back frame to crowd the bale group together.
Detailed Specs
Bale Configuration
4 Bales Wide and 2 Bales Long + Tie Row of 2 (Sideways)
Bundle Dimensions
72” to 76” Wide by 88” to 94” Long
Required Loader Capacity
2,240 lbs.
Working Height
10 ft. 1 in.
Working Length
18 ft. 10 in.
Working Width
7 ft. 10 in.
KN510F Tie-Grabber
Knotter
This highly reliable Rasspe Knotter allows for a consistent tying method.
Squeeze Arm
Once the machine is aligned with the bale bundle, the Squeeze Arm applies pressure and squeezes the bales tightly together to form a strong and compact bundle. This arm is important for creating a bundle that is easy to stack, move, and load.
Loader Mount
This customizable option allows you the flexibility to move between multiple loader hookups.
Twine Arm
When hydraulically engaged, the twine arm wraps twine around the bundle of bales to hold the bundle together.
Multiple Hose Options
This machine allows you to choose two hydraulic hoses with a wire control in the cab, or a four hydraulic hose option. This customizable feature allows you to choose the best option for your operation.
Detailed Specs
Bale Configuration
4 Bales Wide and 2 Bales Long + Tie Row of 2 (Sideways)
Bundle Dimensions
72” to 76” Wide by 88” to 94” Long
Required Loader Capacity
2,240 lbs.
Working Height
10 ft. 1 in.
Working Length
18 ft. 10 in.
Working Width
7 ft. 10 in.
Sq90 Bale Squeeze
Strong Where Needed
Designed and built with precision, this squeeze maximizes lifting capacity while providing the necessary strength. Developed in collaboration with the experts at Clerf, upgrade your operation and experience effortless bale handling today.
Move many Bales in a short order
Moving multiple tied layers of bales in a single move will save you the maximum amount of time. Capable of handling up to 4,000 lbs., this squeeze allows you to move up to eighty, 50 lb. bales at once, streamlining your operations and increasing productivity. The only question is if your loader can take it.
Your Loader, YOur Bale Squeeze
Whether it is your skid steer, telehandler, or forklift we likely already have the ability to attach to it. We have the technology to make it happen.
Detailed Specs
Shipping Dimensions
Working Dimensions
Approximate Weight
Group Size
72” to 76” Wide by 88” to 94” Long
Maximum Lifting Capacity
2,240 lbs.
Bale Packs
4 Bales Wide and 2 Bales Long + Tie Row of 2 (Sideways)