Accumulators

AE10

  • Bales arranged on edge, 5 bales wide/2 bales long
  • Handles bales from 32” to 36” in length
  • 10-bale grouping is ideal for smaller operations, compatible with a small loader because its lighter weight is under the maximum weight requirement of a grabber
  • Bales in this arrangement are 36” long, enabling cross-stacking of bales with the KN510 Tie-Grabber or 510 Grabber models

FIND A DEALER

Explore TheAE10 Bale Accumulator

AE10 Accumulator 1
Twisted chute AE10
2
Stainless Steel Deck AE10
3
Gravity Gates AE10
4
Automatic Back Gate AE10
5
Corner Guide Belt AE10
  • 1TWISTED CHUTE

    The twisted chute turns each bale onto its side, while the baler provides the force needed to push the bales to the top of the chute.

  • 2STAINLESS STEEL DECK

    The stainless steel deck provides a better surface for the bales to slide in higher dirt and moisture conditions.

  • 3GRAVITY DRIVEN GATES AND FINAL BALE LEVER

    As gravity moves the bales downward, the last bale in each row swings a gate to open the next row. The last bale in the grab opens the back gate.

  • 4AUTOMATIC LIFT GATE

    The last bale in the grab opens the back gate. As the accumulator unloads itself, springs and counterweights automatically return all the gates back to their starting position, ready for the next bale.

  • 5GUIDE BELTING

    Sharp turns are no problem as the guide belt keeps bales properly aligned and moving up the chute.

This is a popular model especially with small farms. The AE10 paired with the 510 Grabber or KN510 Tie-Grabber needs a lighter weight loader capacity.
This opens the doors for more usage on smaller farms with small tractors.  This arranges the bales on edge with 4 bales wide and 2 bales long. The tie row of two bales allows for cross-stacking making the loads more stable on the wagons or on trucks.

DETAILED SPECS

  • Bale Configuration

    5 Bales Wide and 2 Bales Long

  • Bundle Dimensions

    75” Wide by 64” to 96” Long

  • Required Loader Capacity

    2,130 lbs

  • Working Height

    9 ft. 2 in.

  • Working Length

    17 ft. 4 in.

  • Working Width

    7 ft. 10 in.

Get the Best of Everything

COMPATIBLE WITH:

KN510 Tie Grabber

Tie-Grabbers

KN510

  • The KN510 Tie-Grabber picks up and ties bales that are arranged by the AE10 bale accumulator. Two long, five wide, on edge.
  • A lower weight requirement for this tie-grabber allows ...

    LEARN MORE
510 Grabber

Grabbers

510

  • For moving and grabbing 10-bale bundles
  • If bales are 36″ long, you can cross-stack them with this model or the KN510 Tie-Grabber
  • Compatible with similarly a...

    LEARN MORE
Norden Background Image

FIRST TIME BUYER?

Let us help you get started

Privacy Policy

© 2022 Norden MFG - All Rights Reserved.