F10 Bale
Accumulator System

Looking for Kuhns MFG?

We’ve rebranded as Norden MFG! Same ownership, same great products, brand new name.

Square Bale Accumulator System For 10 Bales FLat

The Bale Accumulator System for the F10 bale group is the most popular for farmers wanting to use existing wagons and trailers. The width of the group fits nicely on an eight-foot wagon and with the cross-tie bales the load is relatively secure. It is also a nice fit for many loaders and skid steers already operating on the farm. We recommend this system for farms producing 10,000 to 20,000 bales annually.

The F10 Accumulator System

  • Most popular bale accumulator sold by Norden Mfg.
  • 10 bales arranged flat with their string side down, 4 bales wide/2 bales long and two bales turned sideways to the rest of the group for a tie row.
  • Handles bales from 32” to 38” in length
  • 10-bale group is well-suited for small farms, compatible with a smaller loader because its lighter weight is under the maximum weight requirement of a grabber
  • Bundles fill a 7.5’ wagon from one side to the other, and the tie row allows for cross-stacking with the KN510F Tie-Grabber or the 510F Grabber, making loads more stable on wagons and in trucks
  • The bale group dimensions are 72”- 76” wide by 82”- 94” long

Straight Chute

The straight chute allowed each bale to stay flat on its strings, while the baler provides the force needed to push the bales to the top of the chute.

Stainless Steel Deck

The stainless steel deck provides a better surface for the bales to slide in higher dirt and moisture conditions.

Gravity Driven Gates and Final Bale Lever

As gravity moves the bales downward, the last bale in each row swings a gate to open the next row. The last bale in the grab opens the back gate.

Automatic Lift Gate

The last bale in the grab opens the back gate. As the accumulator unloads itself, springs automatically return all the gates back to their starting position, and the rear gate snaps back shut, ready for the next bale.

CORNERING GUIDE BELT

Sharp turns are no problem as the guide belt keeps bales properly aligned and moving up the chute.

Bale Configuration

4 Bales Wide and 2 Bales Long, plus a tie row with 2 bales turned sideways

Group Dimensions

72” to 76” Wide by 88” to 94” Long

Approximate Weight

2,240 lbs.

Working Height

10 ft. 1 in.

Working Length

18 ft. 10 in.

Working Width

7 ft. 10 in.

Bale Handlers
For the F10 Accumulator System

510F Grabber

  • 10 bale grabber for moving bales arranged 2 long, 4 wide plus tie row, on edge.
  • Bale groups can be picked up from the tie row end or the opposite end, enabling cross-stacking
  • Matches bundles made with the AF10 bale accumulator.
  • Heavy-duty grapple.
  • Requires a loader with at least 1,700lb lift capacity and one set of remotes

Steel Tube frame

This quality steel frame ensures high strength and durability.

Cast steel bale hooks

Once the group is tight, a single hydraulic cylinder rotates all the hooks simultaneously into the top of the bales to pick up the group. These durable hooks allow for 2 hooks per bale to ensure the bundle is secure while transporting bundles.

Adjustable Crowd Bar

The Standard Grabber features an adjustable crowd bar that is mounted on the side of the grabber. When approaching a group of bales, the adjustable crowd bar works in combination with the back frame to crowd the bale group together.

Detailed Specs

Bale Configuration

4 Bales Wide and 2 Bales Long, plus a tie row with 2 bales turned sideways

Bundle Dimensions

72” to 76” Wide by 88” to 94” Long

Required Loader Capacity

1,700 lbs.

Working Height

1 ft. 1 in.

Working Length

7 ft. 6 in.

Working Width

6 ft. 0 in.

Approximate Weight

740 lbs.

KN510F Tie-Grabber

  • The KN510F Tie-Grabber picks up and ties bales that are arranged by the AF10 bale accumulator. Four wide, two long plus tie row, flat on strings.
  • A lower weight requirement for this tie-grabber allows for the use of a smaller loader, and the bundle can be picked up from any of its sides.
  • The square dimensions of this arrangement allow for cross-stacking.
  • Requires a loader with at least 1,900lb lift capacity, see details for hydraulic requirements

Knotter

This highly reliable Rasspe Knotter allows for a consistent tying method.

Squeeze Arm

Once the machine is aligned with the bale bundle, the Squeeze Arm applies pressure and squeezes the bales tightly together to form a strong and compact bundle. This arm is important for creating a bundle that is easy to stack, move, and load.

Loader Mount

This customizable option allows you the flexibility to move between multiple loader hookups.

Twine Arm

When hydraulically engaged, the twine arm wraps twine around the bundle of bales to hold the bundle together.

Multiple Hose Options

This machine allows you to choose two hydraulic hoses with a wire control in the cab, or a four hydraulic hose option. This customizable feature allows you to choose the best option for your operation.

Detailed Specs

Bale Configuration

4 Bales Wide and 2 Bales Long, plus a tie row with 2 bales turned sideways

Bundle Dimensions

72” to 76” Wide by 88” to 94” Long

Required Loader Capacity

1,900 lbs.

Working Height

2 ft. 6 in.

Working Length

7 ft. 6 in.

Working Width

6 ft. 0 in.

Approximate Weight

1,440 lbs.

Sq90 Hay Squeeze

  • Picks up tied bundles that are 4, 5, or 6 bales wide and 2.5 bales long.
  • Inside length of 89 inches.
  • For maximum efficiency, it is recommended to pick up as many bales as the loader can safely handle.
  • Has a maximum lifting capacity of 4000 pounds.
  • Weighs 1,020 pounds without the loader bracket.
  • Works with the F10 hay bale pack.
Norden SQ90 bale squeeze detail

Strong Where Needed

Designed and built with precision, this squeeze maximizes lifting capacity while providing the necessary strength. Developed in collaboration with the experts at Clerf, upgrade your operation and experience effortless bale handling today.

Norden SQ90 bale squeeze lifting 60 bales of hay

Move many Bales in a short order

Moving multiple tied layers of bales in a single move will save you the maximum amount of time. Capable of handling up to 4,000 lbs., this hay squeeze allows you to move up to eighty, 50 lb. bales at once, streamlining your operations and increasing productivity. The only question is if your loader can take it.

Norden bale squeeze detail

Your Loader, YOur Hay Squeeze

Whether it is your skid steer, telehandler, or forklift we likely already have the ability to attach to it. We have the technology to make it happen.

SQ90 Hay Squeeze Detailed Specs

Shipping Dimensions

95” L x 74” W x 29” H

Working Dimensions

89” L x 67.5-103.5” W x 29” H

Approximate Weight

1,020 lbs.

Group Size

72-90” W x 89-96” L

Maximum Lifting Capacity

4,000 lbs.

Bale Packs

F10

System Gallery

First Time Buyer?
Let us help you get started